What Is The Main Reason For The Blocked Nozzle?

The nozzle is one of the key parts of the electric injection engine. Its working condition will directly affect the performance of the engine. In other words, a clogged nozzle can seriously affect the performance of the car. This article summarizes several reasons for the blockage of the injector nozzle, which are as follows:

1. The fuel injector plays a fundamental role in the power of each engine. Poor fuel will cause the nozzle not to work properly. Even, it will cause serious carbon accumulation in the cylinder. If the situation is severe, it can completely clog the nozzle and damage the engine. Therefore, the nozzle should be cleaned regularly. However, lack of cleaning the nozzle for a long time or frequently cleaning the nozzle will both cause bad effects.

2. When the fuel nozzle is slightly blocked, it is going to cause a certain impact on the car condition. Sometimes the problems like a gear hanging, starting, or shaking will be occurred. However, when the gear is in high gear, this phenomenon disappears. If the various sensors on the car are working properly, the throttle body has been cleaned and the circuitry is working properly. That's probably just a slight blockage in the nozzle. But during high gear acceleration, it's possible that the slight gelatin is dissolved. So the car's performance is back. Such a slight blockage of the nozzle generally do not need to be cleaned.

3. When the car run with high speed because of the slight gelatin, it will reduce the formation of carbon deposition. In addition, you do not clean the nozzle for a long time, this blockage will become more and more serious. This results in the poor operation of the engine fuel injection, which means the injection angle and atomization is not in good condition. It will also lead to poor engine idling, acceleration or full load conditions, and these problems will make the engine power decrease, fuel consumption increase, or emission pollution increase. It can even disable the engine. Therefore, the nozzle should be carefully cleaned and tested regularly to ensure it works well.


Post time: Sep-04-2022